積成模具清洗劑能快速有效清洗模具表面的油脂、污漬、色粉和塑膠殘留污漬，揮發(fā)性好、不留痕跡；尤其適合去除模具上成型時留下的塑膠樹脂渣、模具防銹膜及污漬、電器接點電路板的清洗等。本品環(huán)保無任何有害物質、桂花香型。
用法：使用前搖勻本品從相距噴件25厘米處輕按噴頭噴射即可。

注意：本品屬于第四代石油類制品，請勿靠近火源，避免強陽光長久直射，貯存在50C以下陰涼干燥處，長時間貯放一層不能超過8箱，如不慎射入眼睛，請用清水清洗。

第三方質量控制：SGS RoHS PAHs MSDS SVHC 16P 鹵素 TBBP-A認證

名稱：模具清洗劑
包裝：24瓶/箱
含量：500ML
450ML兩種容量
500ML單瓶重量：370克
450ML單瓶重量：350克
500ML紙箱尺寸：41.5X28X22.5cm
450ML紙箱尺寸：41X27.5X21cm
This product can effectively clean mold surface grease, stains, toner and plastic residual stains, volatile well, leaving no trace; especially for the removal of mold molding plastic resin residue left, die rust-proof membrane and stains, electrical contact circuit board cleaning. This product is environmentally friendly without any harmful substances, the osmanthus flower.
Usage: shake well before using this product from being sprayed 25 cm at the touch nozzle jet.
Note: This product is the fourth generation of petroleum products, please keep away the fire, avoid long sun point-blank, stored in the 50C following a cool and dry place, Long time storage layer can not be more than 8 boxes, such as accidentally into eyes, please rinse with clear water.
Name: mold cleaning agent
Packing: 24 bottle / box
Content: 500ML
450ML two kinds of capacity
500ML single bottle weight: 370 gram
450ML single bottle weight: 350 gram
Carton size: 41.5X28X22.5cm 500ML
Carton size: 41X27.5X21cm 450ML