點擊圖片查看大圖
沙伯基礎創新塑料PC (SABIC Innovative Plastics) Lexan FR63、FR65、FR66、FR83、FR700、FR735A、聚碳酸酯FR60阻燃,清晰透明、薄聚碳酸酯薄膜拋光表面兩側,和UL94 V-0,嚴格的要求在一個廣泛的電氣、電子和運輸?shù)膽?yīng)用程序。聚碳酸酯FR60電影提供易于熱成型、液壓成形、壓花、模切、折疊和彎曲,非常適合應用,如印刷電路板絕緣、背光飛機飛行面板和顯示器.
| SABIC Innovative Plastics Lexan? FR63 Polycarbonate Film, Flame Retardant | |||
|---|---|---|---|
| Categories: | Polymer; Film; Thermoplastic; Polycarbonate (PC); Polycarbonate, Unreinforced, Flame Retardant | ||
| Material Notes: |
Lexan FR63 flame-retardant film is a clear, thin-gauge polycarbonate film with a matte finish on one side and a polish finish on the other and a UL94 V-0 listing to meet the stringent requirements in a wide range of electrical, electronic and transportation applications. Lexan FR63 film offers ease of thermoforming, hydroforming, embossing, die-cutting, folding and bending and is very suitable for applications such as printed circuit board insulation, backlit aircraft in-flight panels and displays, business equipment insulation, computer rack partitions, TV and monitor insulation.
Information provided by SABIC Innovative Plastics |
||
| Key Words: | PC | ||
| Vendors: | No vendors are listed for this material. Please click here if you are a supplier and would like information on how to add your listing to this material. | ||
|
|||
| Physical Properties | Metric | English | Comments | ||
|---|---|---|---|---|---|
| Density | 1.34 g/cc | 0.0484 lb/in3 | ASTM D792 | ||
| Water Absorption | 0.28 % | 0.28 % | 24 hrs; ASTM D570 | ||
| Surface Tension | 38 - 40 dynes/cm | 38 - 40 dynes/cm | units: Dyne; Dyne Pens | ||
| Mechanical Properties | Metric | English | Comments | ||
| Tensile Strength, Ultimate | 60.0 MPa | 8700 psi | ASTM D882 | ||
| Tensile Strength, Yield | 68.9 MPa | 9990 psi | ASTM D882 | ||
| Elongation at Break | 100 - 160 % | 100 - 160 % | ASTM D882 | ||
| Tensile Modulus | 2.20 GPa | 319 ksi | ASTM D882 | ||
| Gardner Impact |
28.5 J @Thickness 0.762 mm |
21.0 ft-lb @Thickness 0.0300 in |
ASTM D3029 | ||
| Impact Test | 12.2 J | 9.00 ft-lb | Puncture Resistance, Dynatup; ASTM D3763 | ||
| Tear Strength | 11.6 - 21.2 kN/m | 66.2 - 121 pli | propogation; ASTM D1922 | ||
| 245 - 316 kN/m | 1400 - 1800 pli | initiation; ASTM D1004 | |||
| Taber Abrasion, mg/1000 Cycles | 25 | 25 | units: delta Haze; ASTM D1044 | ||
| Electrical Properties | Metric | English | Comments | ||
| Volume Resistivity | 1.00e+17 ohm-cm | 1.00e+17 ohm-cm | ASTM D257 | ||
| Surface Resistivity per Square | 1.00e+16 ohm | 1.00e+16 ohm | ASTM D257 | ||
Dielectric Constant 
|
2.8 @Frequency 1.00e+6 Hz |
2.8 @Frequency 1.00e+6 Hz |
ASTM D150 | ||
|
2.9 @Frequency 60.0 Hz |
2.9 @Frequency 60.0 Hz |
ASTM D150 | |||
| Dielectric Strength |
59.0 kV/mm @Temperature 23.0 °C |
1500 kV/in @Temperature 73.4 °F |
in oil, short time. 0.25mm; ASTM D149-97a Method A | ||
|
Dissipation Factor
|
0.0026 @Frequency 60.0 Hz |
0.0026 @Frequency 60.0 Hz |
ASTM D150 | ||
|
0.0117 @Frequency 1.00e+6 Hz |
0.0117 @Frequency 1.00e+6 Hz |
ASTM D150 | |||
| Arc Resistance | 64 sec | 64 sec | Tungsten; ASTM D495 | ||
| Thermal Properties | Metric | English | Comments | ||
| CTE, linear | 57.6 μm/m-°C | 32.0 μin/in-°F | ASTM E831 | ||
| Specific Heat Capacity |
1.26 J/g-°C @Temperature 4.00 °C |
0.301 BTU/lb-°F @Temperature 39.2 °F |
ASTM E1269 | ||
| Thermal Conductivity | 0.200 W/m-K | 1.39 BTU-in/hr-ft2-°F | ASTM D5470 | ||
| Deflection Temperature at 1.8 MPa (264 psi) | 143.3 °C | 289.9 °F | TMA | ||
| Vicat Softening Point | 175 °C | 347 °F | ASTM 1525-00 modified | ||
| Brittleness Temperature | -135 °C | -211 °F | ASTM D746 | ||
| Glass Transition Temp, Tg | 153 °C | 307 °F | ASTM D3417/D3418 | ||
|
Flammability, UL94
|
V-0 @Thickness 0.250 - 0.375 mm |
V-0 @Thickness 0.00984 - 0.0148 in |
|||
|
V-0 @Thickness >=0.375 mm |
V-0 @Thickness >=0.0148 in |
||||
| Shrinkage |
0.020 % @Temperature 150 °C |
0.020 % @Temperature 302 °F |
ASTM D1204 | ||
| Optical Properties | Metric | English | Comments | ||
| Refractive Index |
1.60 @Temperature 25.0 °C |
1.60 @Temperature 77.0 °F |
ASTM D542A | ||
| Haze | 88 % | 88 % | ASTM D1003 | ||
| Gloss | 10 % | 10 % | over Flat Black min/max @ 60o; ASTM D523-60 | ||
| Yellow Index | 1.1 % | 1.1 % | ASTM D1925 | ||
| Transmission, Visible | 88.2 % | 88.2 % | ASTM D1003 | ||
|
De |
|||||
| Fold Endurance (folds) | 15 | MIT; ASTM D2176-69; double, 0.50mm | |||
| Nominal Gauge Variation (%) | 10 | 0.250mm | |||
| 5 | 0.375 - 0.750mm | ||||
| Pencil Hardness | B-HB | ASTM D3363 | |||
| Surface Energy | 36 | ASTM D5946-01 | |||
中山PC,沙伯基礎PC,德國拜耳PC,日本帝人PC、Tel:18219005688:李生:http://www.shabosl.com/ 經營產品 Noryl PPO, Lexan PC, Valox PBT, Ultem PEI, Cycoloy PC/ABS, Xylex PC/PET, Xenoy PC/PBT/PET.
Users viewing this material also viewed the following:
SABIC Innovative Plastics Lexan? FR60 Polycarbonate Film, Flame Retardant
SABIC Innovative Plastics Lexan? FR700 Polycarbonate Film, Flame Retardant
SABIC Innovative Plastics Lexan? FR65 Polycarbonate Film, Flame Retardant
SABIC Innovative Plastics Lexan? FR66 Polycarbonate Film, Flame Retardant
SABIC Innovative Plastics Lexan? FR735A Polycarbonate Film, Flame Retardant
運費說明：
1.支持快遞，物流和貨運，具體運費根據貨量及具體地址而定.
2.若需試機樣品，可免費提供原料試機，運輸費用由客戶先行支付。
3.一幫情況下，發貨期限為：物流快遞1-3天，貨運2-5天，若超出期限，我們將支付超期費用。
4.收到原料后,請不要急于拆除外包裝,應先仔細檢查塑膠原料的外包裝是否完好及原料型號是否與您所訂購原料型號相匹配。
5.貨物送達后,請時間檢查,發現物流過程中出現大量包裝損壞及原料外漏的，請讓物流人員出具證明并保存，并在24小時內與我們聯系。
6.本公司原料售后的注塑加工由客戶負責，如需幫助，我司工程部將竭盡所能與您共同協商處理。
免責聲明：（1）以上所展示的信息由企業自行提供，內容的真實性、準確性和合法性由發布企業負責，環球塑化網對此不承擔任何保證責任。我們?cè)瓌t上建議您優先選擇“塑企通”會員合作! （2）同時我們鄭重提醒各位買/賣家，交易前請?jiān)敿?xì)核實對方身份，切勿隨意打款或發貨，謹防上當受騙。如發現虛假信息，請向環球塑化網舉報。
簡繁切換