點擊圖片查看大圖FEATURES
? Flame retardant (UL-94 V-0 with and without pigments)
APPLICATIONS
? Rubber parts for home electric appliances
? Anode caps
TYPICAL PROPERTIES1
Specification Writers: These values are not intended for use in preparing specifications. Please contact your local XIAMETER? sales representative prior to writing specifications on this product.
Test Method*
Property
Unit
Value
As supplied
CTM 0176
Appearance
White
JIS K 6249
Plasticity
mm/100
262
As cured
JIS K 6249
Density
g/cm3
1.45
JIS K 6249
Hardness, JIS type A
72
JIS K 6249
Tensile strength, JIS#3
MPa
7.9
JIS K 6249
Elongation, JIS#3
%
200
JIS K 6249
modulus, JIS#3
MPa
5.5
JIS K 6249
Tear strength, crescent
N/mm
9
JIS K 6249
Tear strength, angle
N/mm
18
JIS K 6249
Compression set
(180 °C / 22 hours)
%
11
JIS K 6255
Rebound
%
62
JIS K 6249
Linear shrinkage (disc)**
%
2.7
JIS K 6249
Volume resistivity
Ohm cm
1.8 E+16
JIS K 6249
Dielectric strength
(at room temperature)
kV/mm
32
1. Properties obtained using 0.45 part of RC-4 (50P) (2,5-bis(tert-butylperoxy)-2,5-dimethyl hexane, 50% masterbatch) per 100 parts of XIAMETER? RBB-6300-70 BASE on 2mm thick slabs: molded 10 minutes at 160°C (320°F) and post-cured 4 hours at 200°C (392°F).
*CTM: Corporate Test Method, copies of CTMs are available on request.
JIS: Japanese Industrial Standard.
**Linear shrinkage depends on the curing conditions such as type of curing agent, curing temperature and size of molded product.
HOW TO USE
Vulcanization
XIAMETER? RBB-6300-70 BASE requires the addition of a vulcanizing agent. DOW CORNING TORAY RC-4 50P FD is recommended for molding.
Pigmentation
This Silicone Rubber Base can be pigmented with standard XIAMETER?, Dow Corning? or DOW CORNING TORAY pigment master batches.
PRODUCT SAFETY INFORMATION
PRODUCT SAFETY INFORMATION REQUIRED FOR SAFE USE IS NOT INCLUDED IN THIS DOCUMENT. BEFORE HANDLING, READ PRODUCT AND MATERIAL SAFETY DATA SHEETS AND CONTAINER LABELS FOR SAFE USE, PHYSICAL, ENVIRONMENTAL, AND HEALTH HAZARD INFORMATION. THE MATERIAL SAFETY DATA
免責聲明：（1）以上所展示的信息由企業自行提供，內容的真實性、準確性和合法性由發布企業負責，環球塑化網對此不承擔任何保證責任。我們原則上建議您優先選擇“塑企通”會員合作! （2）同時我們鄭重提醒各位買/賣家，交易前請詳細核實對方身份，切勿隨意打款或發貨，謹防上當受騙。如發現虛假信息，請向環球塑化網舉報。
簡繁切換