點擊圖片查看大圖Polyacrylate processing aid is a polymer polymerized by one or several kinds of acrylate monomer, which can speed up the fusion of PVC resin, increase the melt strength and uniformity, abate fracture and exudation of the fondant without bad influence of the mechanical properties of PVC. So the processing aid has been widely used in the PVC products.
Different kinds of Acrylate monomer and the various proportions will lead to the difference of the plasticizing, melt strength of the Acrylic processing aid. If the viscosity of the processing aid is higher, plasticizing will be lower and melt strength higher. PVC processing aid has no obvious influence on the tensile strength and Vicat softening point, while PVC processing aid with high viscosity will increase the tensile strength and Vicat softening point.
Acrylic processing aid can be widely used in clear and opaque PVC profile, PVC pipe, PVC board, PVC sheet, PVC film and WPC products.
Standard technical data
|
Type |
Appearance |
Viscosity |
Volatile Contents |
Granularity |
|
YM-401 |
White free-flow powder |
3.5-4.2 |
≤1.3% |
≥98% （25 meshes standard sieve） |
|
YM-128 |
5.0-6.0 |
|||
|
YM-125 |
8.0-10.0 |
|||
|
YM-P20 |
2.5-3.2 |
|||
|
YM-175 |
3.0-4.0 |
|||
|
YM-K40 |
5.0-6.0 |
|||
|
YM-51 |
≥10.5 |
|||
|
YM-81 |
≥10.5 |
|||
|
YM-91 |
≥10.0 |
Comparison sheet
|
Type |
Comparison Type |
|
YM-128 |
PA828 of LG Chemical |
|
YM-125 |
K125 of Rohm&Haas |
|
YM-P20 |
PA-20 of Kaneka |
|
P551 of Arkema |
|
|
K-120n of Rohm&Haas |
|
|
YM-91 |
K435 of Rohm&Haas |
|
PA-630 of Kaneka |
|
|
YM-K40 |
K-400 of Rohm&Haas |
|
PA930 of LG Chemical |
|
|
YM-175 |
K-175 of Rohm&Haas |
|
PA-101 of Kaneka |
免責聲明：（1）以上所展示的信息由企業自行提供，內容的真實性、準確性和合法性由發布企業負責，環球塑化網對此不承擔任何保證責任。我們?cè)瓌t上建議您優先選擇“塑企通”會員合作! （2）同時我們鄭重提醒各位買/賣家，交易前請?jiān)敿?xì)核實對方身份，切勿隨意打款或發貨，謹防上當受騙。如發現虛假信息，請向環球塑化網舉報。
簡繁切換